Aktivierungsanalytische Untersuchung von Zirkoniumlegierungen

Durch Aktivierungsanalyse mit Reaktorneutronen (zerstörungsfrei und mit chemischer Aufarbeitung) sowie mittels zerstörungsfreier Untersuchungen an einem Neutronengenerator wurden O, Al, Si, P, Mn, Cu, Nb, Mo, Cd, Ti, Cr und Hf in Zirkoniumlegierungen bestimmt.     

Dickenmessung von Chromüberzügen mit Hilfe der Röntgenfluoreszenzanalyse

Es wird ein Verfahren zur Messung von Chromschichten (ca. 0,1 … 2 μm dick) auf beliebigen Unterlagen dargestellt, das auf der Grundlage der Röntgenfluoreszenzanregung mit der Mn-K_β-Strahlung einer radioaktiven ⁵⁵Fe-Quelle arbeitet Zur Kulibrierung dieser einfachen und schnellen Methode benötigt man aber Standardfolien, deren Dicke mit Hilfe der Röntgenfluoreszenzanalyse unter Verwendung einer Röntgenröhre ermittelt wird.     

Originalarbeiten Autoradiographische Untersuchungen zum Verschleiß von Stahl

Bei Verschleißuntersuchungen mit einer Stift-Scheibe-Apparalur, in der an Stelle des Stifles eine neutronenaktivierte Stahlkugel eingesetzt wird, wird in unserem Laboratorium außer Radioaktivitätsmessungen mit Zählgeräten auch die Autoradiographie angewandt. Dazu wird der Schmierstoff mit dem losen Verschleiß abgewaschen und der festhaftende (adhäsive) Verschleiß durch Kontaktautoradiographie abgebildet. Die notwendigen Expositionszeiten liegen meist bei 2 bis 3 Wochen, wobei im allgemeinen TF 14-Filmmaterial verwendet wird.

Experimentelle Beispiele werden gezeigt und diskutiert. Mit neutronenaktivierten Stahlkugdn verschiedener Abklingzeit wurde durch Verghieh von Radioaktivitätsmessungen mit Zählgeräten und Autoradiographie gezeigt, daß die Schwärzung vorwiegend von der ß-Strahlung der entstandenen Radionuklide herrührt.     

High pressure spectroscopy of chromium doped LiTaO3 crystals

Abstract

The effect of pressure on the luminescence spectrum of the weak field system Cr³⁺ : LiTaO₃ is presented. By using pressure to induce a low to high crystal field strength transition, we demonstrate the ability of pressure to identify distinct dopant bonding environments in luminescent materials.     

SEM and Raman spectroscopy analyses of laser-induced periodic surface structures grown by ethanol-assisted femtosecond laser ablation of chromium

The effect of fluence and pulse duration on the growth of nanostructures on chromium (Cr) surfaces has been investigated upon irradiation of femtosecond (fs) laser pulses in a liquid confined environment of ethanol. In order to explore the effect of fluence, targets were exposed to 1000 pulses at various peak fluences ranging from 4.7 to 11.8?J?cm^–2 for pulse duration of ～25?fs. In order to explore the effect of pulse duration, targets were exposed to fs laser pulses of various pulse durations ranging from 25 to 100?fs, for a constant fluence of 11.8?J?cm^–2. Surface morphology and structural transformations have been analyzed by scanning electron microscopy and Raman spectroscopy, respectively. After laser irradiation, disordered sputtered surface with intense melting and cracking is obtained at the central ablated areas, which are augmented with increasing laser fluence due to enhanced thermal effects. At the peripheral ablated areas, where local fluence is approximately in the range of 1.4–4?mJ?cm^–2, very well-defined laser-induced periodic surface structures (LIPSS) with periodicity ranging from 270 to 370?nm along with dot-like structures are formed. As far as the pulse duration is concerned, a significant effect on the surface modification of Cr has been revealed. In the central ablated areas, for the shortest pulse duration (25?fs), only melting has been observed. However, LIPSS with dot-like structures and droplets have been grown for longer pulse durations. The periodicity of LIPSS increases and density of dot-like structures decreases with increasing pulse duration. The chemical and structural modifications of irradiated Cr have been revealed by Raman spectroscopy. It confirms the formation of new bands of chromium oxides and enol complexes or Cr-carbonyl compounds. The peak intensities of identified bands are dependent upon laser fluence and pulse duration.     

A convenient one-pot synthesis of N-fused 1,2,4-triazoles via oxidative cyclization using chromium (VI) oxide

A facile one-pot synthesis of N-fused 1,2,4-triazoles from heterocyclic hydrazines and aldehydes is reported. The reaction is efficiently promoted by chromium (VI) oxide to afford the desired products mostly in high yields and in relatively short time. The high yield of the products and short reaction time are notable advantages of the developed protocol. This protocol is effective toward various substrates having different functionalities.     

A facile fabrication of MOF for selective removal of chromium (III) from aqueous solution

A simple method for fabricating a metal organic framework (MOF: HKUST-1) as sorbent for selective removal of chromium (III) from aqueous solution is discussed. The structure and morphology of HKUST-1 was identified by fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), the powder X-ray diffraction (XRD) and N₂ adsorption-desorption (BET) analysis. Its removal process of chromium (III) and chromium (VI) on HKUST-1 was assessed systematically under various conditions such as pH value, shaking time and initial concentration of chromium (III). At pH 6.0–8.0, HKUST-1 were selective towards chromium (III) but hardly chromium (VI). Kinetic parameters fitted well with pseudo-second-order model and adsorption progress was described by Langmuir isotherm equations and spontaneous and endothermic according to the results of thermodynamics studies (?G?<?0, ?H?>?0, ?S?>?0).     

树枝状吡啶亚胺铬催化剂的合成及其催化性能研究

以1. 0代聚酰胺-胺树枝状大分子为配体骨架、吡啶二甲醛为原料,合成了一种新型树枝状吡啶亚胺(DPI)配体,再以CrCl_3·6H_2O为络合试剂,制备DPI-Cr催化剂。采用IR、UV-Vis、MS、元素分析等确证了产物结构。考察溶剂种类、助催化剂种类、反应温度、乙烯压力以及Al/Cr摩尔比对DPI-Cr催化乙烯齐聚性能的影响。结果表明,DPI-Cr催化剂表现出良好的催化活性和烯烃选择性,优化反应条件下,催化效率可达4. 91×10~4g/mol Cr·h,C_6和C_8选择性为73. 90%。